7 John Deere 2032r Problems and Troubleshooting

John Deere 2032r Problems

If you live on a vast piece of land, keeping it tidy is essential. Tidiness will help you to keep snakes, insects, and other crawling animals at bay.

Among the tools you will need for this job is a John Deere 2032r tractor. This is a top-notch tractor that can do virtually all the tasks on the farm.

For instance, you may deploy it to haul heavy farm equipment and loads from one point to another.

John Deere 2032r features a 32 HP engine known for its fuel economy. The engine uses advanced technologies such as high-pressure injection, leading to better fuel utilization.

Unfortunately, just like other tractors, there are plenty of John Deere 2032r problems you must learn to deal with.

Problems:

  1. Transmission or engine overheats
  2. The engine doesn’t start
  3. Steering difficulties
  4. Low engine power
  5. Engine stalls
  6. Low fluid pressure
  7. 3-point hitch issues

1. Transmission or Engine Overheats

The tractor engine overheats when the cooling system is not working correctly.

This could happen due to a leakage in the radiator cap or when the fins get clogged. When the fins are clogged, it takes a long time before the engine cools down.

Also, due to insufficient engine oil, lubrication may be a problem so excessive friction results in more heat and could make the engine heat up.

In some cases, the transmission may heat up and make the engine get hot.

Solutions

  • Clean the fins and replace the cap
  • If the tractor’s belt is loose or broken, consider replacing it
  • Top up the oil
  • Fix any broken cooling part
  • Ensure the transmission fluid is at the right level
  • Reduce the transmission load

2. The Engine Doesn’t Start

The engine may not start due to battery issues or wiring problem. Similarly, it may refuse to start if the fuel is too low or when the fuel filters are dirty.

Lastly, the tractor engine may not start if the fuel injection pump timing or injection nozzle are damaged or when they malfunction.

Solutions

  • Ensure the battery is fully charged and delivers the correct voltage
  • Change the battery if faulty
  • Check and fix the loose connections
  • Clean the terminals repair the starter solenoid, or replace it
  • Clean or replace fuel filters
  • Drain the stale fuel and replace it with a new one

3. Steering Difficulties

At some point, the steering gets stiff, making it difficult to steer the tractor in the right direction.

In some cases, the steering may become loose, or the tractor is forced to lean on one side. Any of these problems may make it difficult for you to steer the tractor in the desired direction.

Also, if there is air in the hydraulic system or the steering filter gets clogged, it will make the steering wheel stiff.

Solutions

  • Check the coupling or the column shaft for tear and wear. If you notice any defective part, ensure to fix it.
  • Check the power steering control valve and replace it if worn out.
  • To up the steering fluid.
  • Inflate the tires.
  • Repair or replace the steering pump.

4. Engine Power is Low

Your tractor will likely experience low engine power if the fuel injection nozzle is faulty or clogged.

Likewise, the problem will likely arise if the hoses and fuel lines do not allow the fuel to get to the engine because they are dirty or clogged.

In some cases, the engine may experience low power if the gasket head is blown or when the oil level is low.

Solutions

  • Clean or replace the hoses and fuel lines.
  • Clean the air filter.
  • Replace any blown hydraulic cylinder head gasket.
  • Change the transmission oil filter.
  • Top up the oil and keep it at the required level.

5. Engine Stalls

Sometimes the tractor engine stalls shortly after starting or could shut itself off. This may occur when the pump is defective. Also, if the coolant temperature drops, the engine may stall.

Alternatively, the engine may stall because of fouled spark plugs, a clogged fuel system, or stale fuel.

Solutions

  • Warm up the engine to raise the coolant’s temperature.
  • Buy a new pump or repair the existing one.
  • Clean the fuel and air filters.
  • Change the spark plugs if they don’t produce enough sparks to ignite the fuel.
  • Clean the fuel system and replace the stale fuel with a new one.

6. Low Fluid Pressure

There are many causes of low fluid pressure. There could be a leak, a clogged hydraulic system, or low viscosity.

Also, when the hydraulic control valve block or the hydraulic oil wears out, it could lead to a drop in hydraulic pressure.

Buying cheap hydraulic fluid or storing it in places that do not meet minimum standards could also cause a drop in hydraulic pressure.

Solution

  • Ensure there are no leaks in the hydraulic system.
  • Unclog the hydraulic filters.
  • Store hydraulic fluid in places that meet the minimum temperature requirements.
  • Buy quality fluids even if it means paying a few more dollars.
  • Replace the fluid before it completely wears out.

7. 3-Point Hitch Issues

A 3-point hitch allows the operator to adjust the height of tractor implements. Thus, any defect or issue in the three parts that control the 3-point hitch may make it hard to use the implements.

The three parts that may be affected include the control valve, hydraulic pump, and lever.  Typically, the hydraulic pump generates hydraulic oil pressure, which is then transmitted to the lift’s inlet port.

The control valve permits the hydraulic pressure to either flow in or out while the lever enables the operator to select the position.

Thus, the hitch’s housing features a control valve that regulates the pressure throughout the 3-point hitch.

The valve opens and closes to allow hydraulic oil pressure to flow freely in the 3-point hitch depending on the position of the lever. The control lever allows the operator to lift or lower the arms.

Consequently, when it is faulty, the operator may not be able to lift or lower the arm. So it becomes difficult for the operator to perform the task at hand.

Solutions

  • Regular maintenance of the 3-point hitch is necessary.
  • Change hydraulic filters often.
  • Check connections and ensure caps and vents are tight so that no air gets into them to make the pump cavitate.
  • Replace the faulty control valve.
ProblemCauseSolution
Transmission or the engine overheatsLeakage in the radiator cap or clogged finClean the fin and replace the radiator cap
Engine doesn’t startDead batter or wiring issue, low fuelRecharge the battery and fix the wiring problem. Check the fuel tank and refill it if low
Steering difficultiesWorn out column shaft, clogged steering filter element or insufficient steering fluidReplace the shaft and top up the steering fluid
Low engine powerClogged fuel injection nozzles or dirty hose and fuel linesClean the nozzle, fuel lines or replace the clogged fuel filter
Engine stallsA defective pump or when the coolant temperature dropsReplace the pump or raise the temperature of the coolant
Low fluid pressureLeakage or clogged hydraulic systemFix hydraulic system leaks and unclog the hydraulic filter
3-Point hitch issuesDefective control valve, hydraulic pump, or leverRegular maintenance of  the 3-point hitch

What John Deere 2032r Customers Think About the Mower

John Deere is a universal brand that supplies millions of machinery and plants, including 2032R.

Thus, previous users of John Deere 2032r have plenty of things to say about the tractor.

Firstly, using the tractor is easy and allows new users to go about their tasks unhindered.

Secondly, the performance of the machine is impressive and is distinct from other tractors.

However, users have noted that the tractor comes with a few issues that need to be sorted out regularly.

If you are a DIY person, you can solve some of the problems without involving a mechanic.

On the negative side, users are dissatisfied with the design, which they say is not attractive to the eye. Also, a few people have lamented that using the tractor on a wetland may not be easy.

Overall, the tractor is good; thus, you can rely on it to perform a range of tasks, such as loading, lifting, and mowing.

John Deere 2032r Review

John Deere 2032r is a solid and flexible tractor to consider buying if you have more acreage of land.

You could deploy it to perform essential tasks such as loading, lifting and pulling. The tractor’s body is solid and built using quality material.

Besides, it is versatile, efficient, and has a massive hose power output that allows you to deploy it to a range of tasks.

You can also use it to move heavy equipment from one point to another either by pulling or lifting them.

On the flip side, the tractor is expensive, and you will need to acquire some knowledge on fixing John Deere 2032r problems to enjoy its services.

How Is John Deere 2032r Different From 2025R?

Although John Deere 2032R and John Deere 2025R are similar in engine capacity, drivetrain, and power, the two are different in terms of size and weight.

John Deere 2025R is 115.7 inches long and 58.5 inches wide. On the other hand, John Deere 2032R is 108.9 inches and 47.1 inches wide.

Also, the 2032R version weighs 2879 pounds while the 2025R weighs 1793.4 lbs. Also, John Deere 2032R is robust and has the edge over the 2025R counterpart.

It is designed to work in rougher terrain and has a bigger capacity. The tractor can hold 15 gallons of fuel, while the 2025R holds only 12 gallons.

This implies that you will work more with the 2032R version than you would with the 2025R.

Lastly, the 2025R version can pull or lift 915 pounds, while John Deere 2032R can pull 1356 Pounds.

Here are some of the common John Deere 2025r PTO problems you should expect.

FAQs

Where is John Deere 2032r manufactured?

John Deere 2032r is made in the US. The tractor came out in 2013 and is part of the 2000 series. It is fitted with Yanmar3TNE88-PJ and features a hydrostatic transmission. Besides, the tractor comes with two backward and two forward gears and can lift up to 1,600 pounds while pulling 2,000 pounds of weight.

How much does a John Deere 2032r cost?

Although the price of John Deere 2032 differs depending on the dealer, it will cost you about $23,199 to purchase the tractor from your local dealership. However, the dealer may charge more or less depending on the tractor’s configuration. So prepare to pay more if it comes with a cab and a loader.

What is the maximum amount that John Deere 2032r can lift?

The maximum amount John Deere 2032r can lift varies depending on the tractor’s condition. Also, the year the machine was manufactured could also determine the weight it could lift. Overall, a well-maintained John Deere 2032r could lift about 2,032 pounds.

Conclusion

John Deere 2032R is a 30.7 horsepower tractor manufactured in 2013 and runs on a Yanmar diesel engine.

The engine features three cylinders and comes in with 2WD and 4WD. These are unique features that make the tractor quite reliable.

However, despite the great features the 2013 model comes with, John Deere 2032r problems the operator should be aware of.

These are teething problems, which you should be able to sort out if you look forward to enjoying the services the tractor offers.

For instance, beware that the tractor’s transmission slips and jerks, especially when going uphill. Also, expect to experience a few more problems with the fuel system.